Our product range includes a wide range of Resistor such as Metal Film Resistors 1/4W,1/2W,1W,2W, Metal Film Resistor, Thick Film Resistors, Wire Wound Resistors and Vitreous Enamelled Resistors.
Approx. Price: Rs 1,100 / NOS
Item Code: OMF
Isha agencies have on offer quality thin film resistors which are capable of performing under the worst of environmental conditions. Trustworthy and consistent, these transistors are capable of tolerating high fluctuating loads and resist moisture technically.
Our product is available in the following electronic readings:
- Type: OMF
- Power: 1/8 W ~ 2W
- Resistance Range: 1R ~ 10M
- Tolerance:±0.05% ~ 5%
- TCR:±15,25,50,100 ppm/0 C
- Precision test & measuring instruments
- Minimum Order Quantity: 5000 NOS
Isha agencies is one of the prominent manufacturer of Metal Film Resistor on offer quality which are capable of performing under the worst of environmental conditions.
Item Code: OTF
The wide range of thick film resistors is known for the width of its resistance frequency and complete non induction. Our thick film resistance gauge will provide you with complete solutions to all your resistance related operations. Also, these resistors are known for their compactness and tidiness on the circuit board.
Some of the features which make our product special are:
- Easy soldering and loading
- Wide range of resistance values
Our thick film resistors are available in the mentioned readings
- Type: ODB
- Power: 1.5KW ~ 7KW
- Resistance Range: 10R ~ 200R
- Tolerance: ±10%
- TCR: ±350 ppm/0 C 2.
- Type: OTF
- Power: 1W ~ 10W
- Resistance Range: 1K ~ 1G
- Tolerance: ±1% ~ 5%
- TCR: ±100 ppm/0 C
Our fixed wire wound resistors are quite popular in the automotive electrical industry. They feature in almost every major brand two and four wheelers. Available in their radial and axial pattern, these resistors come with a timeless promise of performance in various silicon and ceramic coatings. The fixed wire range comes in the following measurements:
Power Ceramic Encased (SQP):
- Type: OCE
- Power: 2W ~ 20W
- Resistance Range: 0.1R ~ 10K
- Tolerance: ±5% ~ 10% TCR ±200 ppm/0 C
- Type: OAH
- Power: 25W ~ 300W
- Resistance Range: 1R ~ 10K
- Tolerance: ±0.25% ~ 5%
- TCR: ±25 ~ 200 ppm/0 C
- Type: OSR
- Power: 1W ~ 5W
- Resistance Range: 0.003R ~ 0.05R
- Tolerance: ±1% ~ 5%
- TCR: ±20 ~ 100 ppm/0 C
- Minimum Order Quantity: 10000
Vitreous Enamelled Resistors are available in a range from 20 Watts to 500 Watts.
The Nickel-Chrome winding is completely protected by several coats of vitreous enamel, which have been fired to produce a high reliability resistor, capable of withstanding adverse conditions.
Resistors are supplied with terminal tags suitable for screws, or on some sizes, for 'Faston' terminals.
Terminal bands are spot welded in position on the heat resistant ceramic former, and the winding in turn spot welded to the terminal before the enamelling process. The terminal bands are therefore an integral part of the resistor, protected by the vitreous coating.
HRC Fuse Bases
Power Zener Diodes